The imbalance of plastic injection molding products is a common problem that may involve a variety of reasons. In order to solve this problem, we need to analyze these reasons and give corresponding solutions.First, improper mold designThe design of hot runner is unreasonableHot runner is a key part

TPR、TPE注塑成型缺陷的原因及解决办法TPR和TPE是两种常用的热塑性弹性体材料，它们在注塑成型过程中可能会遇到一些缺陷。下面是一些常见缺陷的原因及解决办法：1.如果注射速度太快，材料保留时间过长会导致产品表面光泽下降。问题解决方案：应降低注射速度，减少停留时间。2.该材料热稳定性差，热分解解决问题的方法：使用具有良好热稳定性和光泽的材料，或在材料中添加热稳定剂。3.机筒温度低，喷嘴温度太低，会导致产品表面光泽度降低。问题解决方案：应增加喷嘴温度以提高熔体温度。4.模具温度太低，冷却速度太快。当熔体仍然填充时，在腔壁上形成硬壳，壳层受到各种力使其变白和浑浊，从而减少产品。表面光泽解决问题的

Color difference is a common problem in injection molding products. How to effectively control color difference is very important to ensure product quality and improve customer satisfaction. Here are a few practical strategies to help you solve this problem.1. Master the influence of cylinder temper

Injection mold die is a common problem, it will lead to many adverse consequences in injection molding production, such as reduced production efficiency, mold damage and product quality decline. In order to solve this problem, we need to analyze the causes of the die and take appropriate solutions.T