Views: 1 Author: Site Editor Publish Time: 2023-04-24 Origin: Site
Coated mold is a kind of mold made by hot vulcanization technology. It is characterized by high strength, high toughness, high wear resistance and high corrosion resistance. Compared with other molds, coated molds have the advantage of smooth surface, wear resistance and corrosion resistance, which can make the products more beautiful, delicate and lasting.
The production process of coated mold needs to go through many steps, including mold design, mold making, mold heat treatment and surface treatment. Among them, mold design is a very critical step, need to consider a number of factors, such as mold structure, mold material, mold process, etc. In the process of mold production, it is necessary to pay attention to the accuracy of the mold, surface finish and material selection, to ensure that the quality of the mold produced is good. Heat treatment of mold is to heat the mold to a certain temperature to change the physical and chemical properties of the mold, so that it is more suitable for making products. Surface treatment is the coating of a special material on the surface of the die to improve the wear and corrosion resistance of the die.
Coating mould is widely used in various fields, such as household appliances, automobiles, aviation and so on. In the field of home appliances, plastic moulds can be used to make shells and panels for televisions, computers, refrigerators and other products. In the automotive field, the adhesive mold can be used to make car parts such as bumper, door and window. In the aviation field, the adhesive mold can be used to make the wing, fuselage, tail and other parts of the aircraft.
Adhesive mold is generally soft adhesive, so the sealing requirement of the mold is relatively high. If there is a slight problem, it will produce running glue, flying edge and other problems, which are difficult to solve. In addition, the placement of adhesive products is also difficult to ensure the safety of people and the correct positioning. These are required to have a more thorough design. In addition, adhesive products are generally appearance parts with high appearance requirements, so the difficulty of the mold will also go up.
In short, the coating mold is a kind of high-quality, high requirements of the mold, its production process needs to go through a number of steps, need to pay attention to a number of factors, to ensure that the quality of the mold produced. Coated moulds are widely used in various fields, such as household appliances, automobiles, aviation, etc. Through the use of coated moulds, products can be more beautiful, delicate and lasting.
Copyright 2020 Fanstar (Dongguan) Smart Technology Co., Ltd. All Rights Reserved. Sitemap.