Injection mold standard parts limit block use method

Injection mold standard parts limit block is rarely used for single die, more used for continuous die. The installation position is mainly in the mold frame part of the outside of the plate forming the concave template and other injection molds. It is possible to accidentally pinch your hand when adjusting after the preparation. After the completion of the preparatory work, the role of the limit block is over. In order to prevent the part from clamping, the cover should be removed and the gap should be left to ensure safety.

Injection mold standard parts limit block has the following two methods of use.

1. Determine the method of using dead spots when preparing for work

Adjust the limit block to the position of gentle contact by sliding block adjustment to determine the bottom dead point. Limit blocks are haplotype and covered type. When using more than one limit block, try to achieve high uniformity by grinding at the same time.

2. The method of using to reduce the deviation of the lower dead point in stamping processing

By adjusting the slider to determine the bottom dead point is still in constant contact with the limit block to stabilize the dynamic accuracy. If only lightly contact, will damage the punching machine.

The limit block is the part that determines the dead point of the injection mold, but it does not change once it is determined. The structure of some molds can be changed by grinding the mold height again. Such molds need to be adjusted every time. The mission of Fanstar is to master the core technology of injection molding production, communicate and analyze the technology before mold production with customers from the production needs of finished products, so that the mold delivery time is short, the life is long, the mass production is fast and the finished product quality is excellent! Have the need of injection molding mold welcome to contact us!