+86 198 2019 2009(WhatsApp、WeChat)
Injection mold high cavity surface temperature points
Home - FANSTAR (DONGGUAN) SMART TECHNOLOGY CO., LTD. » Blog » Industry News » Injection mold high cavity surface temperature points

Injection mold high cavity surface temperature points

Views: 4     Author: Site Editor     Publish Time: 2022-11-10      Origin: Site

Injection mold high cavity surface temperature points

The most common molding plastics with high cavity surface temperature are polyphenylene sulfide (PPS glass fiber 30%), liquid crystal polymer (LCP glass 40%), polyethylene terephthalate (PET), polyamide /46 nylon (PA46) and polycarbonate (PC), and the surface temperature of the cavity is between 70 and 150. We can choose the corresponding molding plastic according to the specific requirements of injection products, and we should pay special attention to this point in the mold design.

Because it is a high cavity surface temperature injection mold, special attention must be paid to temperature control. There are mainly the following ways:

1. Drum heater temperature regulation mode

How it works: The temperature is kept constant through simultaneous use with the temperature sensor. For more accurate temperature control, a heat shield is installed between the injection molding machine press plate and the mold mounting plate.

Advantages: large heat capacity, with the advantages of fast heating;

Disadvantages: the heater temperature distribution is uneven, it is difficult to maintain an even temperature distribution; In addition, the heater has a limited life and needs to be replaced regularly.


2. Pressure steam temperature regulation mode

Working principle: Temperature regulator with special pressure pump is used to adjust the temperature.

Advantages: Easy to ensure high temperature

Disadvantages: need to process the same as the conventional water temperature regulation for mold temperature control cooling hole.

3. Oil temperature control mode

How it works: The oil discharged from the circulating pump circulates through the connector hose in the flow channel set in the template or cavity, thus keeping the temperature constant.

Advantages: Once the temperature is raised to the set temperature, the temperature can be relatively stable.

Disadvantages: Longer heating time is required and there is a risk of burns when handling the oil.


The mission of Fanstar is to master the core technology of injection molding production, communicate and analyze the technology before mold production with customers from the production needs of finished products, so that the mold delivery time is short, the service life is long, the rapid mass production and the finished product quality is excellent! Have the need of injection mold welcome to contact us! At present, more and more injection materials require high temperature on the surface of the cavity, especially in the engineering plastic box super engineering plastic. When designing and manufacturing this kind of injection mold, we must always pay attention to the main points of high cavity surface temperature injection mold.




Name: Iwan Fandra 丨Director
Tel: +86 198 2019 2009

E-mail: fandra77@vertical-china.com


Get In Touch

Copyright 2020 Fanstar (Dongguan) Smart Technology Co., Ltd. All Rights Reserved. Sitemap