How to maintain injection mold correctly

Injection mold maintenance is a very important work, because it can ensure the service life of the mold and production efficiency. The service life of the die depends on the quality of the die material, machining accuracy and the way of use. Generally speaking, the service life of the mold can reach several decades, but in order to ensure the quality and production efficiency of the mold, the maintenance work is very important.

Maintenance of injection moulds usually involves the following steps:

1. Clean the surface of the mold: Use a cleaning agent or a cleaning machine to clean the surface of the mold to remove dust, oil and other dirt.

2. Check mold accessories: Check whether each part of the mold is damaged or worn. If yes, replace or repair it in time.

3. Filling lubricant: Filling lubricant on the surface of the mold to ensure the lubrication performance of the mold and reduce friction and wear.

4. Disassemble the mold: If the mold parts need to be replaced, disassemble the mold. Professional tools and equipment should be used when disassembling the mold to avoid damaging the mold surface and other parts.

5. Install the mold: When installing the mold, use the correct tools and equipment to ensure that the mold is installed correctly and does not damage other parts.

6. Adjust the mold: If the mold has size deviation or other problems in the production process, the mold needs to be adjusted. When adjusting the mold, professional tools and equipment should be used to ensure that the adjustment is accurate and does not damage the mold surface and other parts.

Injection mold maintenance needs to pay attention to the following points:

1. Carry out maintenance according to the prescribed maintenance cycle, and do not exceed the time limit of maintenance.

2. Use correct tools and equipment for maintenance to avoid damage to mold surfaces and other parts.

3. Before maintenance, it is necessary to thoroughly clean the mold surface and other parts to ensure cleanliness.

4. During maintenance, professional tools and equipment should be used to ensure the quality and efficiency of maintenance.

In short, injection mold maintenance is very important, it can ensure the service life and production efficiency of the mold, but also can improve the use of the safety of the mold. If you have not done mold maintenance, it is recommended that you do it as soon as possible to ensure the quality and production efficiency of the mold.