How to deal with the viscose of injection mold

Injection mold line position viscose is a common problem, but if not timely treatment, will have a serious impact on the service life of the mold and product quality. Next, we will introduce the causes of injection mold position viscose, harm and solutions.

Causes of viscose in injection mold

The viscose of injection mold is mainly caused by the mold surface is not smooth enough or the residual glue is not removed. This situation often occurs in the process of injection molding, especially in the high temperature, high pressure environment, more likely to appear.

The harm of viscose in injection mold

The line position viscose of injection mold will affect the service life of mold and product quality. When glue is attached to the surface of the mold, the glue will corrode the surface of the mold, making the surface of the mold rough, affecting the processing accuracy and service life of the mold. At the same time, glue will also affect the appearance and performance of the product, so that the quality of the product is affected.

Injection mold line position viscose solution

It is necessary to adopt some practical skills and tools to solve the problem of line position viscose in injection mold. First of all, the glue on the surface of the mold needs to be cleaned regularly to ensure that the surface of the mold is clean. Secondly, you can use some cleaning agent or glue remover to remove the glue from the surface of the mold. In addition, some surface treatment agents can be used to improve the smoothness and wear resistance of the die surface.

In addition, if the adhesive on the mold surface is serious, you can consider using some adhesive primer to solve the problem. These treatments can effectively remove glue from the surface of the mold without causing damage to the surface.

In short, the injection mold line position viscose is a problem that needs to be dealt with in time, otherwise it will have a serious impact on the service life of the mold and product quality. Hope the above content can help you solve the problem of injection mold line position viscose.